| |
| Heavy Duty All Geared Lathe |
Model : GL / EL - 1 to 8
|
| TECHNICAL SPECIFICATIONS |
| TECHNICAL DATA |
HEAVY DUTY ALL GEARED LATHE |
| MODEL |
GL |
EL |
| Center height over flat ways |
250 mm |
300 mm |
| Width of Bed |
315 mm |
375 mm |
| Swing over bed |
475 mm |
575 mm |
| Swing over Saddle |
360 mm |
460 mm |
| Swing over Cross side |
300 mm |
400 mm |
| Swing in Gap |
785 mm |
885 mm |
| Width of Gap in front of Face Plate |
200 mm |
200 mm |
| Admit between center |
| GL / EL-1 |
1000 mm |
1000 mm |
| GL / EL-2 |
1550 mm |
1550 mm |
| GL / EL-3 |
2000 mm |
2000 mm |
| GL / EL-4 |
2500 mm |
2500 mm |
| GL / EL-5 |
3000 mm |
3000 mm |
| GL / EL-6 |
3500 mm |
3500 mm |
| GL / EL-7 |
4200 mm |
4200 mm |
| GL / EL-8 |
5000 mm |
5000 mm |
| Main Spindle |
| Spindle Nose (Thread) |
74.3-6 TPI |
74.3-6 TPI |
| Std. Spindle Bore |
52 mm |
52 mm |
| Tapper Bore in Spindle |
MT-6 |
Mt-6 |
|
| Speed |
| Nos. Range |
RPM |
8/50 to 1000 |
| Carriage |
| Cross Slide Travel |
350 mm |
400 mm |
| Compound Slide Travel |
200 mm |
200 mm |
| Lead Screw (17/0.15-15) |
| Dia / (TPI) |
38.1/4 |
38.1/4 |
| Thread |
| Range metric |
28/0.5-15 |
28/0.5-15 |
| Inch |
40/2-60 |
40/2-60 |
| Feeds |
| Longitudinal (mm/re) |
0.065 to 2.00 |
0.065 to 2.00 |
| Cross (mm/re) |
0.015 to 0.048 |
0.015 to 0.048 |
| Tail Stock |
| Sleeve Dia |
63.5 |
63.5 |
| Sleeve Travel |
180 mm |
200 mm |
| Tapper Bore in Sleeve |
MT-4 |
MT-4 |
| Electricals |
| Power Supply |
3 HP |
5 HP |
| R.P.M. |
1440 |
1440 |
| Tool Shank |
25 |
25 |
| Accuracy : |
Geometrical and practical accuracies,
confirm to IS : 1978 (Part I) 1993 |
|
|
| DIMENSOIN |
| Model |
Floor Space occupied (mm) |
Approx weight (kg) |
Approx size of case (mm) |
Volume of case (mt3) |
| Nett |
Gross |
| GL/1 |
2440 x 1450 |
1575 |
1825 |
2740 x 1105 x 1370 |
4.15 |
| GL/2 |
3010 x 1450 |
1675 |
1975 |
3200 x 1105 x 1370 |
4.84 |
| GL/3 |
3460 x 1450 |
1875 |
2225 |
3700 x 1105 x 1370 |
5.60 |
| GL/4 |
4125 x 1450 |
1975 |
2375 |
4370 x 1105 x 1370 |
6.62 |
| GL/5 |
5000 x 1450 |
2500 |
3500 |
5070 x 1105 x 1370 |
7.68 |
| GL/6 |
5780 x 1450 |
3200 |
4200 |
5800 x 1105 x 1370 |
8.78 |
|
STANDARED ACCESSORIES
Hardened & ground bedways, Full Notorn gear box, Dog plate, Four position tool post & Spanner, 2 Nos. dead centre, Center Adaptor, Oil Tray, Changes gear set (for inch & mm), thread dial indicator, Motor pulley, spanner set & Instruction manual, Electrical with suitable switches. |
OPTIONAL ACCESSORIES
Cam Lock Type Spindle, electro Megnatic Foot Break, D.R.O. on Cross Slide, taper turning attachment, Coolant pump with tankm Splash guard, Rear tools post with extended cross slide, Machine lamp, Revolving centre, Pipe Centre, Tools post grinder, Carrier plate, face plate, Pin type Steady rest, Bearing type steady rest, Follow rest, True chuck & Dog Chuck. |
| # Top |
|
|
|
|
